Smart Glass Maintenance Method Of A Anti-two Solid Three Wipe

- Mar 27, 2017-

smart glass maintenance method of a anti-two solid three wipe

smart glass is through electronic control, light control and other glass transparent and opaque switch of a glass, the following look at the maintenance of dimming glass.


   1, anti-collision


Usually do not force the collision glass surface, for the anti-glass surface scratches, the best shop cloth. In the dimmed glass furniture, put things on, to gently, avoid collision.


2, placed fixed


smart glass furniture is best placed in a more fixed place, do not arbitrarily move back and forth, to place objects smoothly, heavy objects should be placed at the bottom of the glass furniture to prevent the furniture center of gravity caused by instability. In addition, to avoid the wet, away from the stove, with acid, alkali and other chemical reagents isolated to prevent erosion deterioration.


3, towel wipe


Daily cleaning, with a wet towel or newspaper can be wiped, in case of stains can be towel dipped in beer or warm vinegar wipe, the other can also use the current market for sale of glass cleaning agent, avoid strong acid and alkali The solution is clean. Winter smart glass surface prone to frost, can be dipped in thick water or white wine to wipe, the effect is very good.


4, toothbrush wipe


Once the pattern of smart glass glass once dirty, can be dipped in a toothbrush with detergent, along the pattern can be removed to remove the circular wipe. In addition, you can also drop the kerosene on the glass or with chalk ash and gypsum powder dipped in water on the glass to dry, and then wipe with a clean cloth or cotton, so that the glass is clean and bright.


5, detergent clean


The use of a wet cloth with a detergent can also make the glass that is always stained with oil clean. First of all, the art of smart glass full of cleaning agent, and then paste the plastic wrap, so that the solidification of the oil softening, over fifteen minutes later, tear off the plastic wrap, and then wipe with a damp cloth. In order to keep the dimmer glass bright and clean, you must always hands clean, glass if there is writing, you can use rubber soaked in water friction, and then wipe with a damp cloth; glass if the paint, cotton can be dipped in vinegar scrub; Wipe the glass, make it bright as crystal.

Previous:How To Prevent Wire Glass Rusting Next:A Brief History Of Intelligent Electronic Control Glass